DIN 22111-1990 地下煤矿开采用皮带输送机.轻型承载支架
作者:标准资料网 时间:2024-05-29 13:52:42 浏览:9596
来源:标准资料网
【英文标准名称】:Beltconveyorsforundergroundcoalmining;lightconstruction
【原文标准名称】:地下煤矿开采用皮带输送机.轻型承载支架
【标准号】:DIN22111-1990
【标准状态】:作废
【国别】:德国
【发布日期】:1990-07
【实施或试行日期】:
【发布单位】:德国标准化学会(DIN)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:材料;规范(审批);设计;采掘;带式输送机;支架;轻型;地下开采;作标记;轻;尺寸;物资清单;煤矿开采;支座;结构
【英文主题词】:light(magnitude);undergroundmining;inventories;beltconveyors;mining;specification(approval);structures;dimensions;supports;racks;coalmining;design;marking;light-duty;materials
【摘要】:
【中国标准分类号】:D93
【国际标准分类号】:3620
【页数】:8P;A4
【正文语种】:德语
基本信息
| 标准名称： | 塑料球压痕硬度计 技术条件 |
| 英文名称： | Specification for the ball indentation hardness testers of plastics |
| 中标分类： |
仪器、仪表 >>
试验机与无损探伤仪器 >>
非金属材料试验机 |
| ICS分类： |
|
| 替代情况： | 替代JB/T 7410-1994 |
| 发布部门： | 中华人民共和国工业和信息化部 |
| 发布日期： | 2010-02-11 |
| 实施日期： | 2010-07-01 |
| 首发日期： | |
| 作废日期： | |
| 归口单位： | 全国试验机标委会 |
| 起草单位： | 长春试验机研究所有限公司 |
| 出版社： | 机械工业出版社 |
| 出版日期： | 2010-07-01 |
适用范围
本标准规定了塑料球压痕硬度计的技术要求、检验方法、检验规则、成套性、标志、包装与随行文件等内容。
本标准适用于按GB/T 3398.1测定塑料和硬质橡胶等材料球压痕硬度用的塑料球压痕硬度计。
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类： 仪器 仪表 试验机与无损探伤仪器 非金属材料试验机
Product Code:SAE J514
Title:Hydraulic Tube Fittings
Issuing Committee:Hydraulic Tube Fittings Committee
Scope: This SAE Standard covers complete general and dimensional specifications for 37 degree flared and flareless types of hydraulic tube fittings and O-ring plugs. Also included are pipe fittings and adapter unions for use in conjunction with these tube fittings. These fittings are intended for general application in hydraulic systems on industrial equipment and commercial products.These fittings are capable of providing leakproof, full flow connections in hydraulic systems operating at working pressures as specified in Table 1 for respective sections.Since many factors influence the pressure at which a hydraulic system will or will not perform satisfactorily, the values shown in SAE J1065 should not be construed as a guaranteed minimum.For any application, it is recommended that sufficient testing be conducted and reviewed by both the user and fitting manufacturer to assure that performance levels will be safe and satisfactory.
Rationale: This SAE Standard covers complete general and dimensional specifications for 37 degree flared and flareless types of hydraulic tube fittings and O-ring plugs. Also included are pipe fittings and adapter unions for use in conjunction with these tube fittings. These fittings are intended for general application in hydraulic systems on industrial equipment and commercial products.These fittings are capable of providing leakproof, full flow connections in hydraulic systems operating at working pressures as specified in Table 1 for respective sections.Since many factors influence the pressure at which a hydraulic system will or will not perform satisfactorily, the values shown in SAE J1065 should not be construed as a guaranteed minimum.For any application, it is recommended that sufficient testing be conducted and reviewed by both the user and fitting manufacturer to assure that performance levels will be safe and satisfactory.
